Asphalt driveways look absolutely stunning if they are properly constructed, maintained, and taken care of! Before you plan to construct a new driveway, you should do proper cost calculations and computations. This helps in properly estimating a budget for the asphalt driveway construction.
Giving you a rough glimpse of this estimation, the national average price of building an asphalt driveway is $4,500 and its typical price range falls in between $3,800 – $8,250 for 1000 square feet. The per square foot installation cost for an asphalt driveway is $4 – $6.
Basics of Asphalt Driveway
- 0.1 Basics of Asphalt Driveway
- 0.2 Asphalt Driveway Cost Assumptions
- 0.3 Asphalt Driveway Cost Across Different Countries
- 1 Factors that Affect Asphalt Driveway Cost
- 1.1 Hidden Cost in Your Asphalt Driveway Project
- 1.2 Per Hour Labor Cost for Asphalt Driveway
- 1.3 Costs to Remove Existing Asphalt Driveway
Asphalt driveways are usually made of sand, rock, and asphalt cement. Their standard form usually comes out to be deep smooth black. Some people like to add designs onto their asphalt driveways.
Asphalt Driveway Cost Assumptions
As we have already mentioned to you that the national average cost while putting up an asphalt driveway is around and about $4,500 for 1000 square feet. This is not the actual price and it may increase or decrease depending on various factors. Like, location and size of your driveway. The quality of materials used may also bring a significant and prominent change in the cost of an asphalt driveway construction.
The per square foot installation price is $4 – $6. In addition, if you want to incorporate special features in your driveway, then this cost will increase. Under this category of special features, one can assume and estimate the cost of adding a chip seal top coat, stamped surface, or a colored asphalt surface.
Besides, the cost of gravel is $2.51 per square foot. Remember that this cost of gravel varies and somewhat differs on the basis of its size and quality.
Lastly, the excavation cost is estimated and predicted to be $3,000 and this price is dependent on the extent of ground to be excavated.
Asphalt Driveway Cost Across Different Countries
Most importantly, the asphalt driveway construction price is estimated to be $1,400 to $9,000 for 1000 square feet across different countries around the world. This price can vary a little bit depending on the country in which you are residing, the cost of labor offered in that state as well as the general difference between pricing.
Factors that Affect Asphalt Driveway Cost
The Size and Length of your Asphalt Driveway
This is one of the obvious and significant factors that may impact your asphalt driveway cost. If you want to build a bigger driveway, then this practice is going to inevitably cost you more. Though the length of asphalt driveway matters a lot and affects your driveway cost but size factor matters more. Furthermore, wider the asphalt driveway, more cost it is going to encapsulate. Those individuals who wish to put a kind of asphalt driveway that can accommodate a lot of parking space for cars will eventually have to pay a higher sum. In addition, those homeowners who just got a single car, then it is better for them to select a narrower driveway.
The Material Cost of your Asphalt Driveway
One needs to keep in mind that the cost of asphalt pavements specifically ranges from $4 to $6 per square foot. This even includes the labor cost. Moreover, when buying materials of it, this price falls between $84 to $149 per ton. It is always recommended to get good quality asphalt so that your driveway may last for a long time in excellent condition. Furthermore, asphalt pricing changes and fluctuates a little bit with the price of oil.
Asphalt Thickness Impact the Overall Cost Calculation Process
It is generally seen that asphalt driveway is composed of thick base layers and thin top layers. If you manage to build full-depth asphalt pavement, then your driveway will automatically and ultimately look more stable. Thicker your asphalt driveway, the more cost it will incur. And thinner your driveway, less cost it is going to demand from you. We have seen this practice on a general note that a 4″ thick asphalt layer is highly recommended for most kinds of driveways. On other hand, if you have got heavier vehicles, then it is advised to put on a 5-6″ thick asphalt layer.
Hidden Cost in Your Asphalt Driveway Project
While computing asphalt driveway cost, you should keep in mind that the costs associated with the grading and base preparation tasks as well. We have noticed that grading and preparing a base for your asphalt driveway project is usually identified as a hidden cost. If you want your driveway to be fully stable, then the top 6 inches section of soil should be well compacted and then 4 to 8 inches of crushed gravel base should be formed over it. Keep in mind that the type of soil on which you will build a driveway should be free from organic compounds.
Per Hour Labor Cost for Asphalt Driveway
As putting asphalt driveway is general construction work. That is why the per hour cost for such general contracting work lies in between $41 and $51 per hour. These rates differ and vary from one country to another. However, this is the average per hour labor cost for an asphalt driveway construction.
Costs to Remove Existing Asphalt Driveway
If there is an existing asphalt driveway already built and you want to remove it so that you can put new one, then this process of removing and demolishing an existing driveway is going to add more cost on your paving project.
Asphalt is one of the common and durable materials that are used in constructing driveways. This material is reasonably durable and cheap. It can function well for almost 20 years if properly maintained. Furthermore, this driveway construction material is inexpensive and works far better as compared to a concrete driveway. So, if you want to build your driveway in a super impressive way, then try choosing asphalt in this case.